Typical wording for a Bill of Quantities

ITEM	DESCRIPTION	UNIT	QUANTITY	PRICE	AMOUNT
24	Echo Floors hollow core slabs erected onto brickwork 3.0m above ground level including grouting of longitudinal joints. All in accordance with manufacturers specifications. Contact the Tender Department on Tel: 011 662 4600 Fax: 086 667 2037 Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
24.1	Excluding the following : Grouting ends of panels, support beams over openings in load-bearing walls and beams that may be required to support the concentrated loads. The materials required for the grouting. The props if required as well as the screed/topping and mesh measured elsewhere in the Bill. 150mm deep – 900mm wide Echo Floors hollow core slabs
	Spans
	1,000 – 3,400m Type C	m²	50
	3,500 – 3,800m Type D	m²	120
	3,900 – 4,200m Type E	m²	968
	4,300 – 4,600m Type H	m²	40
	4,700 - 5,700m Type H3	m²	96
	5,800 – 7,700m Type X	m²	0
	7,800 – 8,200m Type Z	m²	10
	Design loads to be specified by the Engineer

Example of typical wording for a bill of quantities when the drawings are included in the bill of quantity

ITEM	DESCRIPTION	UNIT	QUANTITY	PRICE	AMOUNT
6.0	Echo Floors hollow core slabs erected onto brickwork 3.0m above ground level including grouting of longitudinal joints. All in accordance with manufacturers specifications.
6.1	Contact the Tender Department on Tel: 011 662 4600 Fax: 086 667 2037 Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
6.2	Excluding the following: Grouting ends of panels, The materials required for the longitudinal grouting. The props if required as well as the screed/topping and mesh measured elsewhere in the Bill. 150mm deep – 900mm wide Echo Floors hollow core slabs
	Type E	m²	500
	Type H Beams to be supplied and erected by Echo Floors	m²	1200
	254 x 146 x 31 I Beam	M	6
	200 x 75 x 25.3 PFC	M	8
	150 x 90 x 10 RSA	M	12